25 Sep 2026
Tyre Pressure Guide: Door Placard vs Sidewall Maximum Pressure
The sidewall maximum is not normally the correct operating pressure for a vehicle. Here is how workshops should find, measure and explain tyre pressure.
Market intelligence
Insights for the market that keeps moving.
25 Sep 2026
Tyre Date Code Explained: What “2526” Means—and What Age Cannot Tell You
Learn how to read a four-digit tyre manufacturing date code and why age must be considered together with condition, storage, service history and inspection.
25 Sep 2026
Replace Two Tyres or All Four? A Workshop Fitment Decision Guide
When only two tyres need replacement, axle position, tread difference, vehicle system and manufacturer guidance all affect the correct recommendation.
25 Sep 2026
Wheel Alignment vs Wheel Balancing: What Each Service Actually Fixes
Alignment adjusts suspension geometry; balancing corrects mass distribution in the tyre-and-wheel assembly. Learn the symptoms and inspection sequence.
25 Sep 2026
Wet-Weather Tyre Inspection: A Malaysian Workshop Checklist Before Heavy Rain
A practical tyre, pressure and vehicle checklist Malaysian workshops can use before sustained rain and long-distance wet-weather travel.
25 Sep 2026
How to Read 205/55 R16 91V: A Tyre Size, Load Index and Speed Rating Guide
A workshop-friendly guide to reading tyre width, aspect ratio, construction, rim diameter, load index, speed rating and XL markings correctly.
25 Sep 2026
Uneven Tyre Wear Guide for Workshops: Inner Edge, Centre, Shoulder and Cupping
A practical diagnostic guide to common tyre wear patterns, including both shoulders, centre wear, one-sided wear, feathering and cupping.
25 Sep 2026
PUSPAKOM’s 1.6mm Full-Tread Rule: A Practical Tyre Inspection Checklist for Workshops and Fleets
PUSPAKOM’s commercial-vehicle inspection procedure now requires at least 1.6mm across the full tyre tread surface. Use this workshop and fleet checklist to improve inspection records.